Filter
Top Products
Endpoint Management Overview
Polycom, Inc. 93
For information about these endpoint actions, see “Endpoint and Peripheral
Management Operations” on page 165.
Peripherals View
Use the Peripherals View to monitor peripherals connected to dynamically
managed endpoints.
Peripherals List in the Peripherals View
By default, the Peripherals list displays a list of all peripherals that are
connected or have been connected to endpoints managed by the CMA system.
Reboot Device Reboot the selected endpoint. This command is only
available for HDX-Series, RealPresence Group Series,
V-Series and VSX-Series endpoints with a Connection
Status of Online.
Search Devices Allows you to seach for endpoints within a range of IP
addresses. The results message displays the number of
endpoints searched and the number of endpoints found
within the IP range.
Manage Owner Edit information for the user (owner) of the selected
endpoint. This command is applicable only when a user is
associated with the endpoint.
View Peripherals View information about peripherals. This command is only
available when one or more peripherals is connected to an
HDX-Series or RealPresence
Group Series endpoint.
Associate User Manually associate a user with the selected endpoint.
Associate Area (Available only when Areas are enabled.) Associate the
selected endpoint to an area so that only specified users
can manage it.
Action Use this action to...