Filter
Top Products
User Management Operations
Polycom, Inc. 277
3 If the guest has an H.323 (IP) endpoint, configure these settings:
4 If the guest has a SIP (IP) endpoint, configure these settings:
Dial Options Specify whether the guest will dial into conferences,
or require that the system dial out to the guest.
Note
To support both options, create a separate Guest
Book entry for each.
Field Description
Field Description
Number and
Number Type
The specific dial string for the guest, and the format
of the number that the MCU must resolve to contact
the guest. This may be an IP address, E.164
address, H.323, or Annex-O.
For Annex-O dialing, in the Number field enter the
H.323.alias@IP
, for example:
• 1001@11.12.13.14
• 1001@domain.com
• username@domain.com
• username@11.12.13.14
Notes
• Polycom endpoints must register with a
gatekeeper before they will attempt an Annex-O
call.
• You can enter a dial string for another MCU as a
guest. If so, you may need to specify the
conference ID in the Extension field also.
Extension Use this field to connect the conference to another
conference on another MCU. In this field, specify the
conference ID or passcode for the conference on the
other MCU.
MCU Service Choose from the list of MCU services defined on the
MCUs with which the CMA system is registered.
Leave this at Any Available Service unless you
have specific knowledge of MCU services.