Filter
Top Products
Polycom CMA System Operations Guide
476 Polycom, Inc.
Delete a Site
To delete a site
1 Go to Admin > Dial Plan and Sites > Sites or Admin > Dial Plan and
Sites > Site Topology.
2 In the Sites list or Site Topology page, select the site of interest and click
Delete.
3 Click Yes to confirm the deletion.
Set Up SIP
The CMA system supports SIP to establish conference connections. If you
want to use SIP, you must enable it and configure SIP settings. You must also
upload SIP URI data.
To implement SIP, complete the following tasks
1 Configure the SIP settings for each site.
When you add a site to the CMA system, you also set up site provisioning,
which includes the SIP settings. Be sure to enable SIP and configure the
servers, protocol, and credentials needed for your SIP sever. See “Add a
Site” on page 465.
2 Import SIP URI data.
After you enable and configure SIP, you must import your endpoint SIP
data from your SIP server. The import provides the CMA system with all
of the URI data it needs to use SIP.
Note
Devices that belonged to a deleted site are automatically reassigned to support
Internet and VPN calls.
Note
If you are using Microsoft as your SIP server, you do not need to import SIP URI
data. The CMA system can retrieve the SIP URI from the enterprise directory.