Filter
Top Products
Polycom CMA System Operations Guide
6 Polycom, Inc.
To change your system password
1 Click Settings in the top-right corner of the page.
2 In the Settings dialog box, click Change Password.
3 Enter your Old Password.
4 Enter a New Password.
5 Confirm the new password and click OK.
Log Out of the Polycom CMA System
To log out of the CMA system
Click Log Out in the top-right corner of the page.
Restart or Shut Down a Polycom CMA System
You have several options for an orderly shutdown or restart of a CMA system
in non-emergency situations.
The options for an orderly shutdown or restart of the system include:
• Use the Shutdown option on the user interface when you must disconnect
the CMA system server for some reason; for example, to move it. All CMA
system functionality is stopped during a Shutdown.
• If the system interface is not available and you must shut down the
system, press once (but do not hold) the power switch on the CMA system
server. This is equivalent to selecting the Shutdown option described
previously.
• Use the Restart option on the user interface when you must cycle the CMA
system for some reason; for example, if the system locks up or loses
connection with the database.
If you have access to the CMA system user interface, you can also stop future
scheduled conferences from starting automatically and wait for active
conferences to end before performing an orderly shut down or restart of the
system.
During a restart, the system will drop all IP conferences. In general, ISDN
conferences will not drop. Also, endpoints registered to the gatekeeper will
drop. IP endpoints not registered with the gatekeeper can continue in
conference.