Filter
Top Products
Dial Plan Setup Operations
Polycom, Inc. 471
Web Access Port Specify the port to use when accessing the endpoint system’s web interface.
If you change this from the default (port 80), specify a port number of 1025 or higher, and
make sure the port is not already in use. You will need to include the port number with the
IP address when you use the Polycom HDX web interface to access the system. This
makes unauthorized access more difficult.
Note
The system restarts if you change the web access port.
Allow Video Display On
Web
Specify whether to allow viewing of the room where the endpoint system is located, or
video of calls in which the endpoint system participates, using the endpoint system’s web
interface.
Note
This feature activates both near site and far site video displays in Web Director.
NTLM Version Specify the NTLM version the endpoint system should use to authenticate.
Security Settings 2
Idle Session Timeout in
Minues
When sessions are enabled, Specify the number of minutes your system can be idle
before the session times out.
Lock Port after Failed
Logins
Specify the number of failed login attempts allowed before the system locks the account.
If set to Off, the system will not lock the user account due to failed login attempts.
This selection controls local and web interface login attempts. For example, if you select
3 here, a user who fails to log in properly twice on the web interface and twice on the
local interface is locked out on the fourth attempt.
Failed Login Window in
Hours
Specify the amount of time that the account remains locked due to failed login attempts.
Port Lock Duration in
Minutes
Specify the amount of time that the port remains locked due to failed login attempts.
Maximum Peer
Certificate Chain Depth
Specify how many links a certificate chain can have. The term peer certificate refers to
any certificate sent by the far-end host to the HDX system when a network connection is
being established between the two systems.
Verify Certificates for
all Web Access
Specify whether the endpoint requires certificate validation to acces the endpoint.
Whitelist
Enable Whitelist of IPs When a whitelist is enabled, allows access to an endpoint’s web interface only by those
systems with an IP address that matches a pattern using regular expression notation.
Field For the endpoint systems at the site being provisioned...