Filter
Top Products
Polycom CMA System Operations Guide
64 Polycom, Inc.
Bit Rate Specifies the maximum connection speed for endpoints
in the conference. Individual endpoints that specify a
lower connection speed connect at that lower speed.
Endpoints that specify a higher connection speed
connect at the speed identified in the conference
template.
If you select a higher speed than an endpoint can
support, the system reduces the speed that endpoint;
however, the conference uses the default connection
speed for endpoints that can match it. If you place the
calls through an endpoint with an embedded MCU, the
behavior depends on the capabilities of that endpoint.
Bit Rate
(continued)
When the dial speed is higher than the number of
channels defined in the H.320 service for the endpoint,
you receive a warning. To continue, lower the dial speed
to less than or equal to the ISDN capability of the
endpoint.
Higher speed is important for high-quality video in a
conference. Because higher speeds use greater
bandwidth, scheduling a high-bandwidth conference
may limit the number of conferences that you can
reserve at one time.
Setting Description