Filter
Top Products
Endpoint Management Overview
Polycom, Inc. 123
Video Network > Preferred Speeds
Preferred Speed for
Placing Calls (Kbps)
Determines the speeds that will be used for IP, ISDN, or
International ISDN calls from this endpoint system when:
• The Call Quality selection is either unavailable or set
to Auto on the Place a Call screen
• The call is placed from the directory
If the far-site endpoint system does not support the
selected speed, the endpoint system automatically
negotiates a lower speed.
YY— Y
IP Calls YY— Y
ISDN Video Call
(H.320)
YY—
International ISDN calls Y Y —
Maximum Speed for
Receiving Calls (Kbps)
Allows you to restrict the bandwidth used when receiving
IP or ISDN calls.
If the far site attempts to call the system at a higher speed
than selected here, the call is re-negotiated at the speed
specified in this field.
YY— Y
IP Calls YY— Y
ISDN Video Call
(H.320)
YY—
Monitors > Monitors 1
Number of Monitors Y
Monitor 1 Options
Monitor 1 Specifies the monitor’s aspect ratio.
• 4:3 — Select if you are using a regular TV monitor.
—Y
Video Format Specifies the monitor’s format:
• DVI — Select if the monitor is connected to the DVI
connector using a DVI or HDMI cable.
• VGA — Select if the monitor is connected to the DVI
connector using a VGA cable.
• Component YPbPr — Select if the monitor is
connected to the DVI connector using component
cables. Polycom HDX 8000 series and Polycom HDX
7000 series systems do not support 720p Component
format for 50 Hz monitors.
• S-Video (Polycom HDX 9000 series only) — Select if
the monitor is connected to the BNC connectors using
an S-Video cable.
• Composite (Polycom HDX 9000 series only) — Select
if the monitor is connected to the BNC connectors
using a composite video cable.
YY—
Display Icons in Call Specifies whether to display all on-screen graphics,
including icons and help text, during calls.
YY— Y
Field For the endpoint systems being provisioned...
HDX Series
V\VSX Series
FX/EX
ViewStation
QDX Series