Filter
Top Products
Dial Plan Setup Operations
Polycom, Inc. 481
Add a Site-to-Site Exclusion
Before you can create a site link exclusion, you must add two or more sites to
the system.
Exclusions are by definition bilateral. No call traffic is allowed to flow across
the site-link in either direction.
To add a site-to-site exclusion
1 Go to Admin > Dial Plan and Sites > Site-to-Site Exclusions.
2 In the Site-to-Site Exclusions page, click Add.
3 In the Add Site-to-Site Exclusions wizard:
a Select the first site of the From/To site pair (by clicking the appropriate
button). If needed, use the Search Site field to find the site.
b Select the second site of the From/To site pair (by enabling the
appropriate check box) and click Continue. You can select more than
one site, if needed.
c Review the site-to-site exclusion and if it is correct, click Save
Exclusion.
Edit a Site-to-Site Exclusion
You cannot edit a site-to-site exclusion; you can only delete it and then re-add
it.
Delete a Site-to-Site Exclusion
To delete a site-to-site exclusion
1 Go to Dial Plan and Sites > Site-to-Site Exclusions.
2 In the Site-to-Site Exclusions page, select the exclusion of interest and
click Delete.
3 Click Yes to confirm the deletion.