Filter
Top Products
Polycom CMA System Operations Guide
68 Polycom, Inc.
If the port count is within 5% of the maximum ports available, it is
displayed in red.
3 To change a bridge assignment for a selected participant, click Auto and
select a bridge from the pull-down menu.
4 When you’ve completed all bridge assignments, click Next.
The Bridge To Bridge Links dialog box displays a graphical view of the
selected bridges.
5 To add a hub bridge (a bridge used to connect one bridge to another),
from the Available Bridges window, select a bridge and click Add
Bridge.
6 Specify bridge-to-bridge connections by selecting the bridges of interest
and clicking Add Link.
The link is graphically represented by an arrow. The bridge at the base of
the arrow dials to the bridge at the point of the arrow.
7 In the Add Link dialog box, select the Link Type.
8 Return to adding or editing the conference, as described in “Conference
Scheduling Operations” on page 49.
Note
A CMA system can only show port counts for conferences scheduled via the
system. Ad hoc conferences are not included in the port count.
Note
If an MCU does not show up in the Bridge To Bridge Links dialog box, then the
MCU software does not support cascading.
Note
A Polycom RMX system cannot dial a Polycom MGC, so do not link from an RMX
system to an MGC system.
Notes
• You can add links from a Polycom MGC system to a Polycom RMX system.
• There is no support for ISDN cascaded links on RMX MCUs.
• The lag time required to update cascaded links may cause more than one
participant to hear the prompt about being the first person to join the conference.