Filter
Top Products
Polycom CMA System Operations Guide
452 Polycom, Inc.
To install a signed certificate that identifies the CMA system
1 Go to Admin > Management and Security > Certificate Management
and click Install Certificates.
A warning appears stating that changes made to the certificates will
require a system restart to take effect.
2 In the Add Certificates dialog box, do one of the following:
— If you have a PFX, P7B, or single certificate file, click Upload
certificate, enter the password (if any) for the file, and browse to the
file or enter the path and file name.
— If you have PEM-format text, copy the certificate text, click Paste
certificate, and paste it into the text box below. You can paste multiple
PEM certificates one after the other.
3 Click OK.
If you are uploading a signed identity certificate for the first time, it will
replace the CMA system self-signed certificate.
4 If you are uploading a signed identity certificate for the first time, you can
verify that the new signed certificate has replaced the default self-signed
certificate:
a In the list of certificates, select the CMA server identity certificate and
click View Certificate Details.
b When the Certificate Details dialog box appears, verify that the
information in the Issued To and Issued By sections has been
replaced by the signed public certificate from the certificate authority.
c Click OK to close the dialog box.
Upload a Certificate Revocation List
This section describes how to install a certificate revocation list (CRL)
provided by a certificate authority.
CAUTION
Installing certificates requires a system restart and terminates all active
conferences.
When you install a certificate, the change is made to the certificate store
immediately, but the system can’t implement the change until it restarts and reads
the changed certificate store.
CAUTION
The CMA 6.2 system requires certificates with Client and Server Authentication in
the Enhanced Key Usage field, otherwise the certificate installation will fail.