Filter
Top Products
Endpoint Management Overview
Polycom, Inc. 117
General Settings > Security
Remote Access
Password
Specifies the password for administrator access when
logging in to the system remotely.
When the remote access password is set, users must
enter it to manage the system from a computer. The
remote access password must not contain spaces.
YYYYY
Meeting Password Specifies the password users must supply to join
multipoint calls on this system if the call uses the internal
multipoint option, rather than a bridge.
The meeting password must not contain spaces.
Do not set a meeting password if multipoint calls will
include audio-only endpoints. Audio-only endpoints
cannot participate in password-protected calls.
YYYY
Software Update
Password
Specifies the password users must enter to update the
software on their endpoint system.
YY
Enable FTP Access Specifies that the endpoint system can be accessed via
an FTP session.
Note: The system restarts if you change the remote
access settings. This setting does not deactivate the
associated port, only the application. Use Web Access
Port to disable the port.
YYY
Enable Web Access Specifies that the endpoint system can be accessed via
its web interface.
Note: The system restarts if you change the remote
access settings. This setting does not deactivate the
associated port, only the application. Use Web Access
Port to disable the port.
YYYYY
Enable Telnet Access Specifies that the endpoint system can be accessed via a
telnet session.
Note: The system restarts if you change the remote
access settings. This setting does not deactivate the
associated port, only the application. Use Web Access
Port to disable the port.
YYYYY
Field For the endpoint systems being provisioned...
HDX Series
V\VSX Series
FX/EX
ViewStation
QDX Series