Filter
Top Products
System Reports
Polycom, Inc. 289
For each call from the selected endpoint, the CDR information includes the
following data.
Field Description
System Information Specifies the name of the selected endpoint.
Model Specifies the model number of the selected
endpoint.
IP Address Specifies the IP address of the selected endpoint.
ISDN or V.35 Number Specifies the ISDN number or V.35 number.
Serial Number Specifies the serial number of the selected endpoint.
Field Description
Start Date Time Specifies the start date and time for the conference.
End Date Time Specifies the end date for the report. This also
defaults to the current date.
Call Duration Specifies how long the call lasted in hours, minutes,
and seconds.
Account Number If Require Account Number to Dial is enabled on the
system, the value entered by the user is displayed
in this field.
Remote System Name Specifies the endpoint to which the endpoint was
connected for the call.
Call Number 1
Call Number 2
Specifies the IP or ISDN numbers for the endpoints
to which the endpoint was connected for the call.
Transport Type The type of call — Either H.320 (ISDN), H.323 (IP),
or SIP.
Call Rate The bandwidth negotiated with the far site.
System Manufacturer The name of the system manufacturer, model, and
software version, if they can be determined.
Call Direction In — For calls received.
Out — For calls placed from the system.
Conference ID A number given to each conference. A conference
can include more than one far site, so there may be
more than one row with the same conference ID.
Call ID Identifies individual calls within the same
conference.