Filter
Top Products
Polycom CMA System SNMP
Polycom, Inc. 417
Polycom CMA System SNMP Operations
This section describes the CMA system SNMP operations including:
• Enable SNMP Messaging
• Edit the SNMP Settings for a Polycom CMA System
• Add an SNMP Notification Receiver
• Configure Alert Thresholds
• Download Polycom CMA System MIB Package
Enable SNMP Messaging
To enable SNMP messaging you must perform the two tasks:
• Edit the SNMP Settings for a Polycom CMA System
• Add an SNMP Notification Receiver
Edit the SNMP Settings for a Polycom CMA System
To edit the SNMP settings for a CMA system
1 Go to Admin > SNMP Settings.
2 To enable SNMP, select an SNMP Version. For information on the SNMP
versions, see “SNMP Overview” on page 415.
3 Configure these settings for the connection between the CMA system and
the SNMP agents on the SNMP Setting page.
Setting Description
Transport Specifies the transport protocol for SNMP
communications. SNMP can be implemented over
two transport protocol:
TCP—This protocol has error-recovery services,
message delivery is assured, and messages are
delivered in the order they were sent. Some SNMP
managers only support SNMP over TCP.
UDP—This protocol does not provide error-recovery
services, message delivery is not assured, and
messages are not necessarily delivered in the order
they were sent.
Because UDP doesn't have error recovery services,
it requires fewer network resources. It is well suited
for repetitive, low-priority functions like alarm
monitoring.