Filter
Top Products
Polycom CMA System Operations Guide
94 Polycom, Inc.
The Peripherals list in this view has these fields.
Actions in the Peripheral View
Besides providing access to the peripherals, the Actions section of the
Peripheral View may also include these context-sensitive commands
depending on the selected peripheral type and its status.
Field Description
Filter Use the filter choices to display other views of the Endpoint
list, which include:
•Type - Filters the list by type. For more information, see
“Endpoint Configuration/Provisioning” on page 105.
• Paired Endpoint- Filters the list by the HDX or
RealPresence Group Series to which the peripherals are
connected.
• IP Address - Filters the list by IP address entered.
• Hardware Version - Filters the list by hardware version
entered.
• Software Version - Filters the list by software version
entered.
Status The state of the peripheral. Possible values include:
• Connected - Peripheral is connected to the endpoint.
• Disconnected - Peripheral is turned off or no longer
connected to the endpoint.
• Error - Endpoint reports an error with the peripheral.
• Blank - Endpoint is not reporting that the peripheral is
connected.
Paired Endpoint Name of the endpoint to which the peripheral is connected or
Not Paired. The Not Paired designation means the
peripheral was connected to an endpoint, but it is not
connected to one now.
Type The type of peripheral.
Serial Number The serial number of the peripheral.
IP Address The IP address assigned to the peripheral, if applicable.
Area (Available only when Areas are enabled.) The area with
which peripheral is associated. The peripheral inherits its
area from the endpoint to which the peripheral is connected.
Hardware Version The hardware version of the peripheral.
Software Version The software version of the peripheral.