Filter
Top Products
System Reports
Polycom, Inc. 285
2 Use the Filter to customize the report by Date, IP Address, Endpoint
Type, Call Type, and Duration.
Call Detail Record Report Administration
By default, the CMA system stores the conference and endpoint call detail
records (CDRs) for 30 days. You can modify the CDR retention period and you
can schedule a weekly archive of the CDRs. These procedures are described in
the following topics.
Modify the CDR Retention Period
By default, the conference and endpoint CDRs are purged after 30 days.
To change how long CDR information is retained
1 Go to Admin > Report Administration.
2 In the Report Administration page, enter the number of Days to keep
Conference and Endpoint CDRs.
3 Click Save Settings.
Schedule Weekly Archives of the CDR Report
To schedule weekly archives of CDR information
1 Go to Admin > Report Administration.
2 In the Report Administration page, select Enable Weekly FTP
Archiving of CDR Records.
Destination Specifies the name, IP address, or alias of the endpoint
that received the call. For point-to-point calls this is
another endpoint. For multipoint calls using an MCU,
this is the MCU.
Destination
Address
Specifies the IP address of the endpoint that received
the call.
Call Type Specifies the type of call: scheduled or unscheduled.
Bandwidth (Kbps) Specifies the bit rate that was used for the call.
Duration (min) Specifies how long the call lasted in minutes, up to a
maximum of 999.
Q.850 Code Specifies the standard cause code for call termination.
Column Description