Filter
Top Products
Dial Plan Setup Operations
Polycom, Inc. 465
Add a Site
To add a site
1 Go to Admin > Dial Plan and Sites > Sites or Admin > Dial Plan and
Sites > Site Topology.
2 In the Sites list or Site Topology page, click Add Site.
3 In the Add Site dialog box, enter a Site Name and Description for the
site.
4 Complete the General Info, Routing, Subnet, and if applicable ISDN
Number Assignment, sections of the Add Site dialog box. The minimum
information required is Site Name, Description, Location, and Subnets.
For information about all of the site fields, see “Add/Edit Site Dialog Box”
on page 388.
5 Click OK.
The new site is added to the system and the Edit Site Provisioning dialog
box appears. These are the site-based parameters that the CMA system
automatically provisions to endpoint systems operating in dynamic
management mode.
6 As needed, edit the default site provisioning details and click Apply.
Note
Not all of the site provisioning parameters apply to all endpoint systems being
provisioned. If an endpoint system does not have a corresponding parameter, it
ignores the parameter.
Field For the endpoint systems at the site being provisioned...
Date and Time Settings
Country Specify the country code for their location.
Date Format Specify the date display format.
Auto Adjust for
Daylight Saving Time
Specify whether or not to adjust the endpoint’s system clock for daylight savings time.
Time Format Specify the time display format.