Filter
Top Products
Remote Alert Setup Operations
Polycom, Inc. 517
To add a remote alert profile
1 Go to Admin > Alert Settings > Remote Alert Profiles.
2 On the Remote Alert Profiles page, click Add.
3 In the Add Remote Alert Profile dialog box, enter a Name and
Description for the profile.
4 To activate the profile, select Enable Profile.
5 Configure one of the following:
— To have all CMA system alerts sent as part of this profile, select Info,
Minor, and Major.
— To have a subset of CMA system alerts sent as part of this profile,
select any combination of Info, Minor, or Major. These selections
work in conjunction with the CMA system alert level settings you
chose previously.
— To have no CMA system alerts sent as part of this profile, leave Info,
Minor, and Major cleared.
6 To use the device type to identify which devices and device alerts should
be sent as part of this profile, click Alert by Device Type and configure
one of the following. For endpoint systems, these selections work in
conjunction with the endpoint alert level settings you choose previously.
a To have all device alerts for all device types sent as part of this profile,
in the Device Type Alert Level Mapping page, select Info, Minor, and
Major for all of the device types.
b To have a subset of device alerts for all device types sent as part of this
profile, in the Device Type Alert Level Mapping page, select any
combination of Info, Minor, or Major for each device type.
c To have all device alerts for a subset of device types sent as part of this
profile, in the
Device Type Alert Level Mapping page, select Info,
Minor, or Major for each device type to be included in the profile.
Alerts for those device types that do not have an alert level selected
will not be included.
7 To use the device name to identify which devices and device alerts
should be sent as part of this profile, click Alert by Device.
a As needed, use the Filter to customize the device list.
Notes
• If you set device alerts for specific devices, these settings override settings
made on the Alert by Device Type page. The settings are not cumulative.
• You cannot set the system up to send device alerts for specific desktop video
endpoints. Polycom CMA Desktop and Polycom PVX endpoints are not
displayed in the Available Device list.