Filter
Top Products
System Administration Overview
Polycom, Inc. 313
CMA Licenses
The CMA Licenses pane displays information about how the CMA system is
licensed, including:
• The Total Number of Licenses available on the system
• The Licenses in Use, which displays two views of the CMA system active
calls:
— A sparkline that presents the license usage over time (60 minutes total;
updated every 5 minutes so there are 12 data points on the sparkline).
— A percentage indicator that shows the current usage.
Pre-call Status
The Pre-call Status pane displays information about the next conference or
conferences that are scheduled to launch including:
Call Model Describes how the CMA system routes selected H.225 call
signaling messages. Possible values include: Routed or Direct.
For more information, see “Routing Mode” on page 398.
Neighbors Displays the number of neighboring gatekeepers identified for the
CMA system.
Alternate
Configured
Displays whether or not the CMA system has an alternate
gatekeeper identified.
Registered
Devices
Displays the number of devices currently registered to the CMA
system gatekeeper.
Active Calls Displays two views of the current CMA system active calls:
• A number field that shows the current number of active calls
• A graph that presents the percentage of active calls over time
Maximum
Allowed
The maximum number of active calls. This value is dependent on
the call model (routed or direct) and the total number of licenses
• In routed mode, the maximum number of active calls is 30%
of the total number of licenses.
• In direct mode, the maximum number of active calls is 60% of
the total number of licenses.
Field Description
Field Description
Time to
Conference
Displays the system-defined pre-call status reporting time of 10
minutes. In other words, the Pre-call Status pane always reports
on conferences that are scheduled to start in the next 10 minutes.
Scheduled to
Launch
Displays the number of conferences scheduled to start in the
next 10 minutes.