Filter
Top Products
Polycom CMA System Operations Guide
470 Polycom, Inc.
Meeting Password Specify the password users must supply to join multipoint calls on this endpoint system if
the call uses the internal multipoint option, rather than a bridge.
This field can also be used to store a password required by another endpoint system that
this system calls. If a password is stored in this field, you do not need to enter it at the
time of the call; the endpoint system supplies it to the system that requires it. The
meeting password cannot include spaces.
Enable Secure Mode Specify whether to operate in secure mode (also known as security mode), which uses
TLS, HTTPS, AES, digital signatures, and other security protocols, algorithms, and
mechanisms. These protocols encrypt management communication over IP, preventing
access by unauthorized users.
When devices at a site are provisioned to operate in secure mode, the CMA system can
only perform the dynamic management operations of automatic provisioning, automatic
software update, and directory and presence services for the devices. The CMA system
cannot perform monitoring or control operations for the devices.
For more information, see the Administrator’s Guide for Polycom HDX Systems.
AES Encryption Specify how to encrypt calls with other sites that support AES encryption.
•Off—No encryption is used.
• When Available—AES Encryption is used with any endpoint that supports it, even if
the other endpoints in the call don’t support it.
• Required for Video Calls Only—AES Encryption is used for all video endpoints in
the call. Analog phone and voice over ISDN connections are allowed. Video
endpoints must support AES Encryption to participate in the call.
• Required for All Calls—AES Encryption is used for all video endpoints in the call.
Analog phone and voice over ISDN connections are not allowed. All endpoints must.
support AES Encryption to participate in the call.
Enable Web Access Specify whether to allow remote access to the endpoint system by the web.
Note
The endpoint systems will restart if the remote access settings are changed. This setting
does not deactivate the associated port, only the application. Use the Web Access Port
setting to disable the port.
Enable Telnet Access Specify whether to allow remote access to the system by Telnet.
Note
The endpoint systems will restart if the remote access settings are changed. This setting
does not deactivate the associated port, only the application. Use the Web Access Port
setting to disable the port.
Enable SNMP Access Specify whether to allow remote access to the system by SNMP.
Note
The endpoint systems will restart if the remote access settings are changed. This setting
does not deactivate the associated port, only the application. Use the Web Access Port
setting to disable the port.
Field For the endpoint systems at the site being provisioned...