Filter
Top Products
Dial Plan Setup Operations
Polycom, Inc. 479
View the Site Links List
To view the Site Links list
Go to Admin > Dial Plan and Sites > Site-Links.
The Site-Links list appears.
Add a Site Link
Before you can create a site link, you must add two or more sites to the system.
To add a site link
1 Go to Admin > Dial Plan and Sites > Site-Links.
2 In the Site-Links page, click Add.
3 In the Add Site-Link dialog box, enter a Name and Description for the
link and select the starting (From Site) and ending (To Site) sites.
4 Enter the Bandwidth and Max Bit Rate and click Save.
The new link appears on the Site Links page.
Edit a Site Link
You may need to edit site links when network changes are made.
If you make a bandwidth change, the current load is not affected; however, the
bandwidth available for future conferences may be affected.
Column Description
Name Name of the link
Description Description of the link
From Site First site reached in the call route
To Site Final site reached through this call link
Max Bandwidth The maximum available bandwidth for audio and video
calls, which you set at the gateway or router. Only applies
to direct links.
Max Bit Rate
(kbps)
The maximum bit rate allowed for an audio and video call.
Only applies to direct links.