Filter
Top Products
Polycom CMA System Operations Guide
174 Polycom, Inc.
8 Click Add.
The endpoint appears in the Endpoint list. By default, the system may
also:
— Add the endpoint to the applicable site.
— Set the HTTP Port to
80
— Add an Alias for the endpoint.
— Make the endpoint Available to Schedule
— Set the Monitoring Level to Standard
Once you’ve added an endpoint, you can associate it with a user. See “Assign
Users Roles and Endpoints” on page 272.
Edit an Endpoint
The CMA system automatically detects IP address changes and updates its
database with the new information for Polycom and third-party endpoints
that are registered with the CMA system.
Capabilities
Enabled
Capabilities enabled on this endpoint. Options are:
•MCU - The endpoint can act as a control unit for
multipoint conferences
• Gateway - The endpoint can act as a gateway for
call management
The MCU provides the capability if it registered
successfully or is managed.
Monitoring Level The monitoring level for the endpoint. Possible values
include:
•Standard. This endpoint is monitored.
•VIP. This endpoint is monitored closely. The VIP
identifier and filters are available to operators to
monitor and manage conferences.
Available to
Schedule
Identifies if the endpoint is available when users are
scheduling conferences
Field Description
Note
For third-party endpoints, the HTTP URL, serial number, and DNS name are not
captured during endpoint registration.