Filter
Top Products
Polycom CMA System Operations Guide
26 Polycom, Inc.
the auditor download and run a verification utility that performs a
checksum operation to make certain that the downloaded audit log is
complete and uncorrupted before the audit log is deleted from the
CMA system.
• Change the audit log Alert Level.
The system change required to support this workflow change is:
The Change Settings command is available from the list of ACTIONS. By
default the audit log Alert Level is set to 70% of the Max File Size Usage,
which is 2 gigabytes.
Device Administration in Maximum Security Mode
Only users assigned the Device Administrator role can perform device
administration tasks.
In addition to the tasks described in the Endpoint Management in Maximum
Security Mode section, the device administrator workflow on a CMA system
operating in maximum security mode allows the device administrator to:
• See the system Dashboard.
• Add, edit, and delete machine accounts for endpoint systems.
The system change required to support this workflow change is:
The Machine Accounts menu option and page is available from the
Admin > Management and Security menu. Before the CMA system can
dynamically manage a HDX system, a device administrator must add a
machine account for the HDX system. This is the same username that the
HDX system administrator should enter on the HDX system for the
provisioning service. This allows the HDX and CMA systems to
authenticate and communicate without using a specific user’s account.
About Machine Accounts
Before the CMA system can dynamically manage HDX systems operating in
maximum security mode, a user assigned the Device Administrator role must
create an HDX machine account for each HDX that the CMA system will
manage. The machine account allows the endpoint to connect and authenticate
with the CMA system for dynamic management purposes without using the
endpoint user’s account.
The Add Machine Account dialog box includes the following information.
Field Description
Enable Machine
Account
Select or clear this option to enable and disable
(respectively) the machine account you create for the
endpoint.