Filter
Top Products
Polycom CMA System Operations Guide
408 Polycom, Inc.
Provision Group for Microsoft Lync or Microsoft Office Communications Server
Integration
You have set up the Microsoft Lync or Office Communications Server group
that needs to be provisioned to endpoints in each automatic provisioning
profile. This controls the directory that endpoints can see.
To provision integration with Microsoft Lync or Office Communications Server
1 Go to Admin > Provisioning Profiles > Automatic Provisioning
Profiles.
2 In the Automatic Provisioning Profiles page, select the profile of interest
and click Edit.
3 In the Provisioning Fields dialog box, click Microsoft Lync Settings and
enter a Group Name.
The Group Name is the group set in the Microsoft Lync Server or Office
Communication Server.
4 Click OK.
Provision SIP Settings for Microsoft Lync or Microsoft Office Communications
Server Integration
By default, SIP is disabled in site provisioning. This procedure describes how
to change existing site provisioning settings so that they provision integration
with one of these unified communications servers.
To integrate with a Microsoft Lync or Office Communications Server, Polycom
endpoints must have a user account on the Microsoft unified communications
server infrastructure. To have the CMA system automatically provision a
Polycom endpoint for this integration, the endpoint must use the same
credentials (username and password) to access both the unified
communications server and the CMA system. Only then can the CMA system
automatically provision a calendaring service-enabled endpoint system.
Notes
• You cannot provision integration with a Microsoft Lync or Office
Communications Server via scheduled provisioning.
• If the endpoint being provisioned is not capable of integration with a Microsoft
Lync or Office Communications Server, the endpoint will ignore this settings.
• The group setting here applies to both Microsoft Lync and Office
Communication Server.