Filter
Top Products
Polycom CMA System Operations Guide
448 Polycom, Inc.
Certificate Operations
In maximum security mode, the root CA certificate must be installed during
First Time Setup. However, you can complete First Time Setup with just the
root CA certificate and the CMA system default self-signed certificate. Then
you can complete the process using the Certificate Management page.
In standard security mode, you can set up certificates at any time.
Use the Certificate Management page to:
• View Certificates and Certificate Details
• Create a Certificate Signing Request
• Install a Certificate
• Upload a Certificate Revocation List
• Delete a Certificate
View Certificates and Certificate Details
To view the list of installed certificates
1 Go to Admin > Management and Security > Certificate Management.
The Certificate Management page displays the list of currently installed
certificates. By default, the system will display only one certificate. It will
be identified as the CMA server identity certificate. When other certificates
are installed, they will display along with the server identity certificate.
The Certificate Management page has this information.
Column Description
Status The status of the certificate. Possible values include:
• Certificate is valid
• Certificate is invalid
Identifier The certificate name as assigned by the CA