Filter
Top Products
Polycom CMA System Operations Guide
138 Polycom, Inc.
To enable LifeSize endpoint management
1 On the CMA system, go to Admin > Management and Security >
Endpoint Management Settings.
2 In the Default Passwords for LifeSize Endpoint Management section of
the Endpoint Management Settings page, enable Use Default
Passwords.
3 Enter the Password for SSH User and confirm the password. Refer to the
LifeSize system documentation for information on using SSH to connect
to the endpoint, then enter the same SSH password here.
4 Enter the Password for Web UI User and confirm the password. Refer to
the LifeSize system documentation for information on using a web
browser to connect to the endpoint, then enter the same web UI password
here.
5 Click Update.
Monitoring
The CMA system can monitor select TANDBERG C Series, TANDBERG Edge,
and LifeSize Team and Express endpoints, so when properly configured, the
CMA system can provide online/offline status and alerts, display call status,
and provide image support including near and far end images for these
endpoints.
Scheduled Provisioning of Selected TANDBERG Endpoints
The following table identifies the fields that the CMA system can provision for
TANDBERG 150, 990, 880, 770 MXP, and TANDBERG C Series endpoints.
See the appropriate TANDBERG product documentation for more
information about these fields and their acceptable values. See “Scheduled
Provisioning Operations” on page 186 for information on implementing
scheduled provisioning of endpoints.
Note
For the CMA system to successfully manage a LifeSize endpoint, SSH must
be enabled on the endpoint. SSH can be enabled on the endpoint through
device provisioning.