Filter
Top Products
Dial Plan Setup Operations
Polycom, Inc. 497
Add a Dial Rule
To add a dial rule
1 Go to Admin > Dial Plan > Dial Rules.
2 In the Dial Rules list, click Add Dialing Rule.
3 Complete the General Info, Routing Action, Trusted Neighbors, and
Gateway Services sections of the Add Dialing Rule dialog box.
4 Click OK.
The new dial rule is added to the system.
Enable or Disable Dialing Rules
You can enable or disable dial rules.
Routing Action The routing action used by this rule. Options are:
• Route
• Block
• Route within region
• Route out of region
• Route to a GW with LCR applied
• Route to a GW service
• Route to a list of GW services
• Route to a trusted neighbor
Note
Not all actions are available for all pattern types.
Site The sites for which this rule is used. May be all sites or a
specific site
Priority The priority assigned this rule
Enabled Indicates whether or not the dial rule is enabled
Column Description
Note
Use caution when changing the default dial rules, which enable basic operations in
the CMA system.