Filter
Top Products
Endpoint Provisioning Operations
Polycom, Inc. 183
Automatic Provisioning Operations
This topic describes the automatic provisioning operations a user assigned the
Device Administrator role can perform. These are:
• View the Automatic Provisioning List and Details
• Add an Automatic Provisioning Profile
• Edit an Automatic Provisioning Profile
• Edit the Profile Order for an Automatic Provisioning Profile
• Clone an Automatic Provisioning Profile
• Delete an Automatic Provisioning Profile
View the Automatic Provisioning List and Details
To view the automatic provisioning list and details about an automatic
provisioning operation
1 Go to Endpoint > Automatic Provisioning.
2 As needed, use the Filter to customize the Endpoint list.
3 Select the endpoint of interest.
4 Expand the Provisioning Details tab in the Device Details section.
Add an Automatic Provisioning Profile
This topic describes how to add automatic provisioning profiles.
When you add an automatic provisioning profile, the CMA system
immediately rolls it out. If it rolls it out first thing in the morning, people who
need to attend a “start the day” conference will have to first wait for their
endpoint to be provisioned. Better to implement profiles in the middle of the
work day and then let the provisioning occur at the designated polling
interval.
To add an automatic provisioning profile
1 Go to Admin > Provisioning Profiles > Automatic Provisioning
Profiles.
TIP
Add provisioning profiles in the middle of the work day, not first thing in the morning.