Filter
Top Products
Polycom CMA System Operations Guide
326 Polycom, Inc.
T120 Rate Determines whether T.120 is enabled, and if so, the default
transfer rate. Enable this setting when you have equipment
that supports T.120 display of data. Options are: 6.4, 14.4,
16, 22.4, 24, 30.4, 32, 38.4, 40, 46.4, 54.4, and 62.4.
Note
Because this setting uses resources on the MCU device, it
is recommended that you select None.
Audio Algorithm Sets the compression algorithm that the MGC uses to
process audio.
The default is Auto.
Note
Selecting a certain video/audio algorithm doesn't guarantee
that it will be chosen for a conference since an MGC device
may negotiate a different algorithm with the endpoints,
depending on the endpoint’s capabilities.
Audio Mix Depth
(sites)
Sets the number of participants with the loudest voices who
can speak at once during a conference. If additional
participants speak, their comments are not heard.
Conference on Port When selected, this option conserves bandwidth and ports
by putting all participants on a single port. When
Conference on Port is enabled, the Video Mode must be
set to one of the Continuous Presence layouts.
RMX General Settings > RMX Profile Settings
Use existing profile Select to use an existing RMX profile.
Clear to set all of the RMX profile settings here in the
conference template. This method ensures that the RMX
profile settings are the way you want them and avoids
maintaining identical profiles on all RMX systems.
Note
With this option selected, conferences fail if they land on an
RMX device and a valid RMX profile is not specified below.
RMX profile name Identifies the RMX profile for the conference, if the
conference is hosted on an RMX system.
Enter the RMX profile routing name, which is generally (but
not always) the same as the profile name as specified in the
RMX platform.
Field Description