Filter
Top Products
Polycom CMA System Operations Guide
338 Polycom, Inc.
Add a Conference Template
To add a conference template
1 Go to Admin > Conference Templates.
2 On the Conference Templates list, click Add .
3 Complete the General Info and MCU Settings sections of the Add
Conference Template dialog box first. Your selection for MCU Settings
affect your choices in the Video Settings section. For more information
on the Add Conference Template dialog box, see “Conference Templates”
on page 321.
4 Complete the Video Settings and Conf Settings sections of the Add
Conference Template dialog box.
5 Click OK.
The new template appears in the Conference Template list.
Edit a Conference Template
To edit a conference template
1 Go to Admin > Conference Templates.
2 On the Conference Templates list, select the template of interest and
click Edit .
3 Edit the General Info, Video Settings, MCU Settings, and Conf Settings
sections of the Edit Conference Template dialog box as required.
4 Click OK.
Note
The CMA system does not validate the Conference Template settings. When you
create a new conference template, you must make certain that the settings match
the capabilities of the MCUs (MGC or RMX device) or endpoints.
Note
If you change the conference template Speed setting and there are scheduled
conferences using that template, all endpoints in the scheduled conferences are
reset to whichever is less: the new template Speed or the maximum speed that the
endpoint supports.