Filter
Top Products
MCU Bridge Management Operations
Polycom, Inc. 235
To enable cascading conferences
1 On the MCUs, configure entry queues as required and record the entry
queue number(s). For more information, see the product documentation
for the MCU.
2 Go to Network Device > MCUs.
3 As needed, use the Filter to customize the MCU list.
4 Select the MCU of interest and click Edit .
5 Go to the MCU Resources section of the Edit Device dialog box and
select Use Entry Queue.
6 Go to the MCU Cascading section of the Edit Device dialog box.
7 For a Polycom RMX MCU:
a Enter the Master Entry Queue Number ID and Slave Entry Queue
Number ID.
b (Optional) Enter the Master Entry Queue ISDN Number and Slave
Entry Queue ISDN Number.
8 For a Polycom MGC MCU:
a Enter the Cascade Entry Queue Number ID.
b (Optional) Enter the Cascade Entry Queue ISDN Number.
9 Click Update.
Delete an MCU Bridge
To delete an MCU from the CMA system
1 Go to Network Device > MCUs.
2 As needed, use the Filter to customize the MCU list.
3 Select the MCU of interest and click Delete.
4 Click Yes to confirm the deletion.
The MCU list is updated.
View Bridge Hardware
To view the hardware configuration of a bridge
1 Go to Network Device > MCUs.