Filter
Top Products
Polycom CMA System Setup Overview
Polycom, Inc. 391
Allowed via H.323
aware SBC or ALG
Enables call routing via the Internet, using an
H.323-aware SBC (Session Border Control) or ALG
(Application Level Gateway) server.
Note
For an outbound call to the Internet, you must enter the
firewall gateway service (for example, a Polycom VBP
appliance) code before the IP address in the dial string.
Call Signaling IP
Address
IP address of the SBC or ALG server. Supports only
IPv4 addresses.
Port Port address of SBC or ALG server.
Send Unmodified Dial
String to SBC/ALG
Select this option if your SBC or ALG requires that the
original dial string is passed to it. For example, an H.323
Annex O dial string such as user@company.com is
passed directly to the SBC or ALG instead of resolving
company.com to an IP address.
Deselect this option if your equipment requires a dial
string that is converted from company.com to
gatekeeper IP address. This option is appropriate for
the Polycom VBP.
Total Bandwidth The total bandwidth of the pipe at the site.
Call Max Bit Rate The maximum bandwidth that can be used for each
intrasite call at the site. The default and maximum value
is 2000000 (2 GB).
Subnets
Subnet IP
Address/Mask
Specifies the subnets within the site. For each subnet,
includes:
• IP Address range
• Subnet mask
• Maximum bandwidth for the subnet
• Maximum bit rate per call for the subnet
Enterprise Directory Settings—
Endpoint Enterprise Directory security group settings
Universal Security
Group Filter
When in secure mode, search and select groups that
are provisioned to the endpoints to represent the valid
lists of users that can log in as a user or administrator. If
a user is not a member of one of the selected groups
then the user is denied access to the endpoint.
Enterprise Directory
Admin Group
Enterprise Directory
User Group
Field Description