Filter
Top Products
9-5
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 9 Device Pool Configuration
Device Pool Configuration Settings
Join Across Lines This setting determines whether the Join Across Lines feature is
enabled for the devices or phone users in this device pool. From the
drop-down list box, choose from the following options:
• Off—If you choose this option, the devices in this device pool will
have the Join Across Lines feature disabled.
• On—If you choose this option, the devices in this device pool will
have the Join Across Lines feature enabled.
• Default—If you choose this option, the devices in this device pool
will use the service parameter setting for the Join Across Lines
feature.
Physical Location Select the physical location for this device pool. The system uses
physical location with the device mobility feature to identify the
parameters that relate to a specific geographical location.
Device Mobility Group Device mobility groups represent the highest level geographic entities
in your network and are used to support the device mobility feature.
Device Mobility Related Information
Device Mobility Calling
Search Space
Choose the appropriate calling search space to be used as the device
calling search space when the device is roaming and in same device
mobility group.
AAR Calling Search Space Choose the appropriate calling search space for the device to use when
automated alternate routing (AAR) is performed. The AAR calling
search space specifies the collection of route partitions that are
searched to determine how to route a collected (originating) number
that is otherwise blocked due to insufficient bandwidth.
AAR Group Choose the automated alternate routing (AAR) group for this device.
The AAR group provides the prefix digits that are used to route calls
that are otherwise blocked due to insufficient bandwidth. An AAR
group setting of None specifies that no rerouting of blocked calls will
be attempted.
Calling Party Transformation
CSS
This setting allows you to localize the calling party number on the
device. Make sure that the Calling Party Transformation CSS that you
choose contains the calling party transformation pattern that you want
to assign to this device pool.
Tip Before the call occurs, the device must apply the transformation
by using digit analysis. If you configure the Calling Party
Transformation CSS as None for the device pool and you check
the Use Device Pool Calling Party Transformation CSS check
box in the device configuration window, the transformation
does not match and does not get applied. Ensure that you
configure the Calling Party Transformation Pattern in a
non-null partition that is not used for routing.
Table 9-1 Device Pool Configuration Settings (continued)
Field Name Description