Filter
Top Products
90-72
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Port Configuration Settings
Call Routing Information - Inbound Calls
Significant Digits Choose the number of significant digits to collect, from 0 to 32 or
All. Cisco Unified Communications Manager counts significant
digits from the right (last digit) of the number called. If you choose
All, the Cisco Unified Communications Manager does not truncate
the inbound number.
EXAMPLE
Digits received are 123456.
Significant digits setting is 4.
Digits translated are 3456.
Use for the processing of incoming calls and to indicate the number
of digits, starting from the last digit of the called number, that are
used to route calls that are coming into the BRI span. See Prefix DN.
Calling Search Space Choose the appropriate calling search space. A calling search space
designates a collection of route partitions that are searched to
determine how a collected (originating) number should be routed.
AAR Calling Search Space Choose the appropriate calling search space for the device to use
when automated alternate routing (AAR) is performed. The AAR
calling search space specifies the collection of route partitions that
are searched to determine how to route a collected (originating)
number that is otherwise blocked due to insufficient bandwidth.
Prefix DN Enter the prefix digits that are appended to the digits that this
gateway receives on incoming calls.
The Cisco Unified Communications Manager adds prefix digits
after first truncating the number in accordance with the Num Digits
setting.
You can enter the international escape character + in this field.
Call Routing Information - Outbound Calls
Called Party Transformation
CSS
This setting allows you to localize the called party number on the
device. Make sure that the Called Party Transformation CSS that
you choose contains the called party transformation pattern that you
want to assign to this device.
Note If you configure the Called Party Transformation CSS as
None, the transformation does not match and does not get
applied. Ensure that you configure the Called Party
Transformation CSS in a non-null partition that is not used
for routing.
Use Device Pool Called Party
Transformation CSS
To use the Called Party Transformation CSS that is configured in the
device pool that is assigned to this device, check this check box. If
you do not check this check box, the device uses the Called Party
Transformation CSS that you configured in the PRI Port Gateway
Configuration window.
Table 90-9 BRI Port Configuration Settings (continued)
Field Description