Filter
Top Products
46-5
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 46 Hunt List Configuration
Removing Line Groups from a Hunt List
Removing Line Groups from a Hunt List
You can remove line groups from a new hunt list or from an existing hunt list. The following procedure
describes removing a line group from an existing hunt list.
Procedure
Step 1 Choose Call Routing > Route/Hunt > Hunt List in the menu bar.
Step 2 Locate the hunt list from which you want to remove a line group. See the “Finding Hunt Lists” section
on page 46-1.
Step 3 From the Selected Groups list, choose a line group name.
Note To choose multiple line groups from the list, press the Shift key and click the desired line groups.
Step 4 Click the down arrow below the Selected Groups list box to move the chosen line group to the Removed
Groups list.
Step 5 To remove the line group, click Save. If you click OK, when the window refreshes, the line group no
longer displays in the Selected Groups pane of the hunt list.
Step 6 Click Reset for the changes to take effect. Click Reset and Close in response to the popup window.
Additional Information
See the “Related Topics” section on page 46-7.
Changing the Order of Line Groups in a Hunt List
Cisco Unified Communications Manager accesses line groups in the order in which they display in the
hunt list. The following procedure allows you to change the access order of line groups.
Procedure
Step 1 Choose Call Routing > Route/Hunt > Hunt List.
Step 2 Locate the hunt list in which you want to change the order of a line group. See the “Finding Hunt Lists”
section on page 46-1.
Step 3 From the Selected Groups list, choose a line group.
Step 4 To move the line group up or down in the list, select a group; then, click the up or down arrows on the
right side of the list box.
Step 5 Click Save.
Step 6 Click Reset for the changes to take effect. Click Reset and Close in response to the popup window.
Additional Information
See the “Related Topics” section on page 46-7.