Filter
Top Products
CHAPTER
9-1
Cisco Unified Communications Manager Administration Guide
OL-18611-01
9
Device Pool Configuration
Use the following topics to add, update, or delete a device pool:
• Device Pool Configuration Settings, page 9-1
• Finding a Device Pool, page 9-10
• Configuring a Device Pool, page 9-11
• Synchronizing a Device Pool With Affected Devices, page 9-13
• Deleting a Device Pool, page 9-13
• Related Topics, page 9-14
Refer to the “System-Level Configuration Settings” chapter in the Cisco Unified Communications
Manager System Guide for more information about device pools and the device settings that are assigned
through device pools.
Refer to the “Common Device Configuration” chapter in the Cisco Unified Communications Manager
Administration Guide for more information on configuring Common Device Configuration parameters.
Device Pool Configuration Settings
Device pools define sets of common characteristics for devices. The device pool structure supports the
separation of user and location information. The device pool contains only device- and location-related
information. The Common Device Configuration window under Device > Device Settings > Common
Device Configuration records all the user-oriented information such as type of softkey template that is
used and locale information. Ensure that each device is associated with a device pool and with a common
device configuration for user-oriented information.
Table 9-1 lists and describes device pool configuration settings. For related procedures, see the “Related
Topics” section on page 9-14.
Table 9-1 Device Pool Configuration Settings
Field Name Description
Device Pool Settings
Device Pool Name Enter the name of the new device pool that you are creating. You can
enter up to 50 characters, which include alphanumeric characters,
periods (.), hyphens (-), underscores (_), and blank spaces.