Filter
Top Products
38-4
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 38 Application Dial Rules Configuration
Deleting a Dial Rule
Note If more than one dial rule exists, you can change the priority of the dial rules. See the
“Reprioritizing a Dial Rule” section on page 38-4.
Additional Information
See the “Related Topics” section on page 38-5.
Deleting a Dial Rule
Perform the following procedure to delete a dial rule.
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Call Routing > Dial Rules >
Application Dial Rules.
Step 2 Locate the application dial rule that you want to delete. See the “Finding a Dial Rule” section on
page 38-2.
Step 3 Check the check box next to the application dial rule that you want to delete and click Delete Selected.
A dialog box appears to warn you that you cannot undo deletion of application dial rules.
Step 4 To delete the group, click OK, or to cancel the action, click Cancel. If you click OK, the Cisco Unified
Communications Manager removes the application dial rule from the application dial rules list.
Note You can delete multiple dial rules from the Find and List Application Dial Rules window by
checking the check boxes next to the appropriate dial rules and clicking Delete Selected. You
can delete all the AAR groups in the window by clicking Select All and then clicking Delete
Selected.
Additional Information
See the “Related Topics” section on page 38-5.
Reprioritizing a Dial Rule
Perform the following procedure to reprioritize a dial rule.
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Call Routing > Dial Rules >
Application Dial Rules.