Filter
Top Products
90-90
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Adding Gateways to Cisco Unified Communications Manager
Adding a Cisco IOS MGCP Gateway
Use the following procedure to add and configure a Cisco IOS MGCP gateway to Cisco Unified
Communications Manager. The following Cisco IOS gateways support MGCP:
• CiscoVG200 Voice Gateway
• VG224 Gateway
• Cisco IOS 362x, 364x, 366x Gateways
• Cisco IOS 3725 and 3745 Gateways
• Cisco IOS 26xx and 269x Gateways
• Cisco 2801, 2811, 2821, 2851, 3825, 3845 Gateways
• Cisco Catalyst 4000 Access Gateway Module
• Cisco Catalyst 4224 Voice Gateway Switch
• Communication Media Module
• Cisco IAD2400 gateways
Table 90-14 Gateways
Type of Gateway Procedure to Add
Cisco Voice Gateway 200 (VG200)
VG224 Gateway
Cisco IOS 269X, 26XX, 362X, 364X, 366X,
3725, 3745 Gateways
Cisco 2801, 2811, 2821, 2851, 3825, 3845
Gateways
Cisco Catalyst 4000 Access Gateway
Module
Cisco Catalyst 4224 Voice Gateway Switch
Communication Media Module
Cisco IAD2400
Adding a Cisco IOS MGCP Gateway, page 90-90
Cisco IOS 269X, 3725, 3745 Gateways Adding a Cisco IOS SCCP Gateway, page 90-96
Cisco Catalyst 6000 E1 VoIP Gateway
Cisco Catalyst 6000 T1 VoIP Gateway
Adding a Non-IOS MGCP Gateway, page 90-97
Other Cisco IOS Gateway that is configured
in H.323 mode
Adding a Cisco IOS H.323 Gateway, page 90-98
Cisco Catalyst 6000 24 Port FXS Gateway Adding an Analog Access Gateway and Ports,
page 90-99
Cisco VG248 Gateway Adding a Cisco VG248 Analog Phone Gateway,
page 90-100