Filter
Top Products
113-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 113 Application User Configuration
Application User Configuration Settings
Password Enter alphanumeric or special characters for the application user
password. You must enter at least the minimum number of characters that
are specified in the assigned credential policy.
Confirm Password Enter the user password again.
Digest Credentials Enter a string of alphanumeric characters. Cisco Unified
Communications Manager uses the digest credentials that you specify
here to validate the SIP user agent response during a challenge to the SIP
trunk.
For information on digest authentication, refer to the Cisco Unified
Communications Manager Security Guide.
Confirm Digest Credentials To confirm that you entered the digest credentials correctly, enter the
credentials in this field.
Edit Credential The Edit Credential button displays after you add this user to the
database.
Click this button to manage credential information for this user. See
“Managing Application User Credential Information” section on
page 113-9.
Presence Group Configure this field with the Presence feature.
Note If you are not using this application user with presence, leave the
default (None) setting for presence group.
From the drop-down list box, choose a Presence group for the application
user. The group selected specifies the destinations that the application
user, such as IPMASysUser, can monitor.
The Standard Presence group gets configured at installation. Presence
groups configured in Cisco Unified Communications Manager
Administration also appear in the drop-down list box.
Presence authorization works with presence groups to allow or block
presence requests between groups. Refer to the
“Presence” chapter in the
Cisco Unified Communications Manager Features and Services Guide
for information about configuring permissions between groups.
Table 113-1 Application User Configuration Settings (continued)
Field Description