Filter
Top Products
46-3
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 46 Hunt List Configuration
Adding a Hunt List
Step 3 In the Name field, enter a name. The name can comprise up to 50 alphanumeric characters and can
contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). Ensure each
hunt list name is unique to the route plan.
Timesaver Use concise and descriptive names for your hunt lists. The CompanynameLocationCalltype format,
which usually provides a sufficient level of detail and is short enough, enables you to quickly and easily
identify a hunt list. For example, CiscoDallasMetro identifies a hunt list for toll-free, inter-local access
transport area (LATA) calls from the Cisco office in Dallas.
Step 4 Enter a description in the Description field.
Step 5 Choose a Cisco Unified Communications Manager Group from the drop-down list box.
Note Hunt List registers to the first Cisco Unified Communications Manager in the Cisco Unified
Communications Manager Group as primary Cisco Unified Communications Manager.
Note If you choose a Cisco Unified Communications Manager group that has only one Cisco Unified
Communications Manager that is configured, you receive the following warning:
WARNI NG! The selected Cisco Unified Communications Manager Group has only one Cisco
Unified Communications Manager configured. For the control process to have redundancy
protection, please select a Cisco Unified Communications Manager Group with more than one
Cisco Unified Communications Manager.
Step 6 If this hunt list is to be used for voice mail, click the For Voice Mail Usage check box.
Step 7 To add this hunt list, click Save.
Note A popup message reminds you that you must add at least one line group to this hunt list for it to
accept calls.
The Hunt List window displays the newly added hunt list.
Step 8 The system checks the Enable this Hunt List check box by default for the new hunt list.
If you want to disable this hunt list, uncheck this check box. A popup window explains that calls in
progress are not affected, but this hunt list will not accept additional calls.
Step 9 Add at least one line group to the new hunt list.
To add a line group to this list, click Add Line Group and perform Step 3 through Step 6 of the “Adding
Line Groups to a Hunt List” section on page 46-4.
Additional Information
See the “Related Topics” section on page 46-7.