Filter
Top Products
96-5
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 96 Default Device Profile Configuration
Default Device Profile Configuration Settings
DND Incoming Call Alert When you enable the DND Ringer Off or Call Reject option, this
parameter specifies how a call displays on a phone.
From the drop-down list, choose one of the following options:
• None—This option specifies that the DND Incoming Call Alert
setting from the Common Phone Profile window will get used for this
device.
• Disable—This option disables both beep and flash notification of a
call but for the DND Ringer Off option, incoming call information
still gets displayed. For the DND Call Reject option, no call alerts
display and no information gets sent to the device.
• Beep Only—For an incoming call, this option causes the phone to
play a beep tone only and for the DND Ringer Off option, incoming
call information gets displayed. For the DND Call Reject option, no
call alerts sound and no information gets sent to the device.
• Flash Only—For an incoming call, this option causes the phone to
display a flash alert and for the DND Ringer Off option, incoming call
information gets displayed. For the DND Call Reject option, no call
alerts display and no information gets sent to the device.
Multilevel Precedence and Preemption (MLPP) Information
MLPP Domain Choose MLPP domain that is associated with this device from the
drop-down list box.
MLPP Indication If available, this setting specifies whether a device that is capable of
playing precedence tones will use the capability when it places an MLPP
precedence call.
From the drop-down list box, choose a setting to assign to devices that use
this default device profile from the following options:
• Default—This device inherits its MLPP indication setting from its
device pool.
• Off—This device does not handle nor process indication of an MLPP
precedence call.
• On—This device does handle and process indication of an MLPP
precedence call.
Note Do not configure a default device profile with the following
combination of settings: MLPP Indication is set to Off or Default
(when default is Off) while MLPP Preemption is set to Forceful.
Note Turning on MLPP Indication (at the enterprise parameter, device
pool, or device level) disables normal Ring Setting behavior for the
lines on a device, unless MLPP Indication is turned off
(overridden) for the device.
Table 96-1 Default Device Profile Configuration Settings (continued)
Field Description