Filter
Top Products
90-103
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Modifying Gateways and Ports
Note Restarting or resetting an H.323 gateway does not physically restart/reset the gateway; it only
reinitializes the configuration that was loaded by Cisco Unified Communications Manager.
When you reset any other gateway type, Cisco Unified Communications Manager automatically
drops the calls that are using the gateway. When you restart any other gateway type, Cisco
Unified Communications Manager attempts to preserve the calls that are using the gateway.
Additional Information
See the “Related Topics” section on page 90-104.
Synchronizing a Gateway
To synchronize a gateway with the most recent configuration changes, perform the following procedure,
which will apply any outstanding configuration settings in the least-intrusive manner possible. (For
example, a reset/restart may not be required on some affected devices.)
Procedure
Step 1 Choose Device > Gateway.
The Find and List Gateways window displays.
Step 2 Choose the search criteria to use.
Step 3 Click Find.
The window displays a list of gateways that match the search criteria.
Step 4 Check the check boxes next to the gateways that you want to synchronize. To choose all gateways in the
window, check the check box in the matching records title bar.
Step 5 Click Apply Config to Selected.
The Apply Configuration Information dialog displays.
Step 6 Click OK.
Additional Information
See the “Related Topics” section on page 90-104.