Filter
Top Products
79-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 79 Media Resource Group Configuration
Finding a Media Resource Group
Table 79-1 describes the configuration settings that are used for configuring media resource groups. For
more information about related procedures, see the “Related Topics” section on page 79-5.
Finding a Media Resource Group
Because you might have several media resource groups in your network, Cisco Unified Communications
Manager lets you locate specific media resource groups on the basis of specific criteria. Use the
following procedure to locate media resource groups.
Table 79-1 Media Resource Group Configuration Settings
Field Description
Name Enter a unique name in this required field for the Cisco Unified
Communications Manager to identify the media resource group. This
name can comprise up to 50 characters. Valid characters include
letters, numbers, spaces, dashes, dots (periods), and underscores.
Description Enter a description for the media resource group. This description can
comprise up to 50 characters. Ensure Description does not contain
double quotes (“), less than (<), greater than (>), ampersand (&), or
the percent sign (%).
Devices for this Group This area comprises two panes that are used to define the media
resources for a media resource group: Available Media Resources and
Selected Media Resources.
Available Media Resources This pane lists the media resources that can be chosen for a media
resource group. The list includes the following media resource types:
• Conference Bridges (CFB)
• Media Termination Points (MTP)
• Music On Hold Servers (MOH)
• Transcoders (XCODE)
• Annunciator (ANN)
Music on hold servers that are configured for multicast get labeled as
(MOH)[Multicast].
To add a media resource for this media resource group, choose one
from the list and click the down arrow. After a media resource is
added, its name moves to the Selected Media Resources pane.
Selected Media Resources This pane lists the media resources that were chosen for a media
resource group. For any media resource group, you must choose at
least one media resource.
To delete (unselect) a media resource, choose its name in the list and
click the up arrow.
Use Multicast for MOH Audio
(If at least one multicast MOH
resource is available)
To use multicast for Music On Hold Audio, check this check box. To
do so, make sure that at least one of the selected media resources is a
multicast MOH server.
Note The system administrator configures or creates multicast
audio sources.