CHAPTER
95-1
Cisco Unified Communications Manager Administration Guide
OL-18611-01
95
Device Firmware Load Information
Use device firmware load information to locate devices that are not using the default firmware load for
their device type.
Finding Devices With Non-Default Firmware Loads
The Firmware Load Information window in Cisco Unified Communications Manager Administration
enables you to quickly locate devices that are not using the default firmware load for their device type.
Note Each device can have an individually assigned firmware load that overrides the default.
Use the following procedure to locate devices that are not using the default firmware load.
Procedure
Step 1 Choose Device > Device Settings > Firmware Load Information.
The page updates to display a list of device types that require firmware loads. For each device type, the
Devices Not Using Default Load column links to configuration settings for any devices that use a
non-default load.
Step 2 To view a list of devices of a particular device type that are using a non-default device load, click the
entry for that device type in the Devices Not Using Default Load column.
The window that opens lists the devices of a particular device type that are not running the default
firmware load.
Related Topics
• Updating Device Defaults, page 94-2
• Related Topics, page 94-3