Filter
Top Products
44-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 44 Route Pattern Configuration
Route Pattern Configuration Settings
Table 44-1 describes the available fields in the Route Pattern Configuration window. For related
procedures, see the “Related Topics” section on page 44-13.
Table 44-1 Route Pattern Configuration Settings
Field Description
Pattern Definition
Route Pattern Enter the route pattern, including numbers and wildcards (do not use spaces);
for example, for NANP, enter 9.@ for typical local access or 8XXX for a
typical private network numbering plan. Valid characters include the
uppercase characters A, B, C, and D and \+, which represents the international
escape character +.
Note Ensure that the directory route pattern, which uses the chosen
partition, route filter, and numbering plan combination, is unique.
Check the route pattern, translation pattern, directory number, call
park number, call pickup number, message waiting on/off, or meet me
number if you receive an error that indicates duplicate entries. You can
also check the route plan report.
See the “Wildcards and Special Characters in Route Patterns and Hunt Pilots”
section in the Cisco Unified Communications Manager System Guide for more
information about wildcards.
Route Partition If you want to use a partition to restrict access to the route pattern, choose the
desired partition from the drop-down list box. If you do not want to restrict
access to the route pattern, choose <None> for the partition. See the
“Partition
Configuration” section on page 52-1 for more information on how to use
partitions.
You can configure the number of partitions that display in this drop-down list
box by using the Max List Box Items enterprise parameter. If more partitions
exist than the Max List Box Items enterprise parameter specifies, the Find
button displays next to the drop-down list box. Click the Find button to display
the Find and List Partitions window. Find and choose a partition name by using
the
Finding a Partition procedure in the Cisco Unified Communications
Manager Administration Guide.
Note To set the maximum list box items, choose System > Enterprise
Parameters and choose CCMAdmin Parameters.
Note Make sure that the combination of route pattern, route filter, and
partition is unique within the Cisco Unified Communications Manager
cluster.
Description Enter a description of the route pattern.
Numbering Plan Choose a numbering plan.