Filter
Top Products
90-80
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Port Configuration Settings
Unknown Number Configure the following settings to globalize calling party numbers
that use Unknown for the Calling Party Number Type.
• Prefix—Cisco Unified Communications Manager applies the
prefix that you enter in this field to calling party numbers that
use Unknown for the Calling Party Numbering Type. You can
enter up to 8 characters, which include digits, the international
escape character (+), asterisk (*), or the pound sign (#).
If the word, Default, displays in the Prefix field, you cannot
configure the Strip Digits field. In this case, Cisco Unified
Communications Manager takes the configuration for the
Prefix and Strip Digits fields from the device pool that is
applied to the device. If the word, Default, displays in the
Prefix field in the Device Pool Configuration window, Cisco
Unified Communications Manager applies the service
parameter configuration for the incoming calling party prefix,
which supports both the prefix and strip digit functionality.
• Strip Digits—Enter the number of digits, up to the number 24,
that you want Cisco Unified Communications Manager to strip
from the calling party number of Unknown type before it
applies the prefixes.
• Use Device Pool CSS—Check this check box to use the calling
search space for the Unknown Number field that is configured
in the device pool that is applied to the device.
• Calling Search Space—This setting allows you to globalize the
calling party number of Unknown calling party number type on
the device. Make sure that the calling party transformation CSS
that you choose contains the calling party transformation
pattern that you want to assign to this device.
Before the call occurs, the device must apply the transformation
by using digit analysis. If you configure the CSS as None, the
transformation does not match and does not get applied. Ensure
that you configure the calling party transformation pattern in a
non-null partition that is not used for routing.
Tip For more information on configuring these settings, see
“Configuring the Incoming Calling Party Settings in the
Device Pool, Gateway, or Trunk Configuration Windows” in
the Cisco Unified Communications Manager Features and
Services Guide.
Table 90-9 BRI Port Configuration Settings (continued)
Field Description