Filter
Top Products
85-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 85 Message Waiting Configuration
Finding a Message Waiting Number
Additional Information
See the “Related Topics” section on page 85-5.
Finding a Message Waiting Number
Because you might have several message-waiting numbers in your network, Cisco Unified
Communications Manager lets you locate specific message-waiting numbers on the basis of specific
criteria. Use the following procedure to locate message-waiting numbers.
Partition If partitions are being used, choose the appropriate partition from
the drop-down list box. If you do not want to restrict access to the
message-waiting device directory number, choose <None> for the
partition.
You can configure the number of partitions that display in this
drop-down list box by using the Max List Box Items enterprise
parameter. If more partitions exist than the Max List Box Items
enterprise parameter specifies, the Find button displays next to the
drop-down list box. Click the Find button to display the Find and
List Partitions window. Find and choose a partition name (see the
“Finding a Partition” section on page 52-3).
Note To set the maximum list box items, choose System >
Enterprise Parameters and choose CCMAdmin
Parameters.
Note Make sure that the combination of message- waiting device
directory number and partition is unique within the Cisco
Unified Communications Manager cluster.
Calling Search Space If partitions and calling search spaces are used, from the drop-down
list box, choose a calling search space that includes the partitions of
the DNs on all phones whose lamps you want to turn on (the
partition that is defined for a phone DN must be in a calling search
space that the MWI device uses).
You can configure the number of calling search spaces that display
in this drop-down list box by using the Max List Box Items
enterprise parameter. If more calling search spaces exist than the
Max List Box Items enterprise parameter specifies, the Find button
displays next to the drop-down list box. Click the Find button to
display the Find and List Calling Search Space window. Find and
choose a calling search space name (see the
“Finding a Calling
Search Space” section on page 53-3).
Note To set the maximum list box items, choose System >
Enterprise Parameters and choose CCMAdmin
Parameters.
Table 85-1 Message Waiting Configuration Settings (continued)
Field Name Description