Filter
Top Products
47-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 47 Hunt Pilot Configuration
Hunt Pilot Configuration Settings
Table 47-1 Hunt Pilot Configuration Settings
Field Description
Pattern Definition
Hunt Pilot Enter the hunt pilot, including numbers and wildcards (do not use
spaces); for example, for NANP, enter 9.@ for typical local access, or
8XXX for a typical private network numbering plan. Valid characters
include the uppercase characters A, B, C, and D and \+, which represents
the international escape character +.
Note Ensure that the directory hunt pilot, which uses the chosen
partition, route filter, and numbering plan combination, is unique.
Check the hunt pilot, translation pattern, directory number, call
park number, call pickup number, message waiting on/off, or
meet me number if you receive an error that indicates duplicate
entries. You can also check the route plan report.
• See the “Wildcards and Special Characters in Route Patterns and
Hunt Pilots” section in the Cisco Unified Communications Manager
System Guide for more information about wildcards.
Route Partition If you want to use a partition to restrict access to the hunt pilot, choose
the desired partition from the drop-down list box. If you do not want to
restrict access to the hunt pilot, choose <None> for the partition. See the
“Partition Configuration” section on page 52-1 for more information on
how to use partitions.
You can configure the number of partitions that display in this drop-down
list box by using the Max List Box Items enterprise parameter. If more
partitions exist than the Max List Box Items enterprise parameter
specifies, the Find button displays next to the drop-down list box. Click
the Find button to display the Find and List Partitions window. Find and
choose a partition name by using the
Finding a Partition procedure in the
Cisco Unified Communications Manager Administration Guide.
Note To set the maximum list box items, choose System > Enterprise
Parameters and choose Unified CMAdmin Parameters.
Note Make sure that the combination of hunt pilot, route filter, and
partition is unique within the Cisco Unified Communications
Manager cluster.
Description Enter a description of the hunt pilot.
Numbering Plan Choose a numbering plan.