Filter
Top Products
91-10
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 91 Cisco Unified IP Phone Configuration
Phone Configuration Settings
Always Use Prime Line From the drop-down list box, choose one of the following options:
• Off—When the phone is idle and receives a call on any line, the phone user answers the
call from the line on which the call is received.
• On—When the phone is idle (off hook) and receives a call on any line, the primary line
gets chosen for the call. Calls on other lines continue to ring, and the phone user must
select those other lines to answer these calls.
• Default—Cisco Unified Communications Manager uses the configuration from the
Always Use Prime Line service parameter, which supports the Cisco CallManager
service.
Always Use Prime Line for
Voice Message
From the drop-down list box, choose one of the following options:
• On—If the phone is idle, the primary line on the phone becomes the active line for
retrieving voice messages when the phone user presses the Messages button on the phone.
• Off—If the phone is idle, pressing the Messages button on the phone automatically dials
the voice-messaging system from the line that has a voice message. Cisco Unified
Communications Manager always selects the first line that has a voice message. If no line
has a voice message, the primary line gets used when the phone user presses the Messages
button.
• Default—Cisco Unified Communications Manager uses the configuration from the
Always Use Prime Line for Voice Message service parameter, which supports the Cisco
CallManager service.
Calling Party Transformation
CSS
This setting allows you to localize the calling party number on the device. Make sure that the
Calling Party Transformation CSS that you choose contains the calling party transformation
pattern that you want to assign to this device.
Tip Before the call occurs, the device must apply the transformation by using digit
analysis. If you configure the Calling Party Transformation CSS as None, the
transformation does not match and does not get applied. Ensure that you configure the
Calling Party Transformation Pattern in a non-null partition that is not used for
routing.
Geolocation From the drop-down list box, choose a geolocation.
You can choose the Unspecified geolocation, which designates that this device does not
associate with a geolocation.
You can also choose a geolocation that has been configured with the System > Geolocation
Configuration menu option.
Use Device Pool Calling
Party Transformation CSS
To use the Calling Party Transformation CSS that is configured in the device pool that is
assigned to this device, check this check box. If you do not check this check box, the device
uses the Calling Party Transformation CSS that you chose in the Phone Configuration window.
Table 91-1 Phone Configuration Settings (continued)
Field Description