Filter
Top Products
68-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 68 Calling Party Transformation Pattern Configuration
Calling Party Transformation Pattern Configuration Settings
Table 68-1 describes the calling party transformation pattern configuration settings. For related
procedures, see the “Related Topics” section on page 68-7.
Table 68-1 Calling Party Transformation Pattern Configuration Settings
Field Description
Pattern Definition
Pattern Enter the transformation pattern, including numbers and wildcards (do not use
spaces); for example, for NANP, enter 9.@ for typical local access or 8XXX
for a typical private network numbering plan. Valid characters include the
uppercase characters A, B, C, and D and \+, which represents the international
escape character +.
Note Ensure that the pattern is unique. Check the transformation pattern,
route pattern, translation pattern, directory number, call park number,
call pickup number, message waiting on/off, or meet me number if you
receive an error that indicates duplicate entries. You can also check the
route plan report.
See the “Wildcards and Special Characters in Route Patterns and Hunt Pilots”
section in the Cisco Unified Communications Manager System Guide for more
information about wildcards.
Partition If you want to use a partition to restrict access to the transformation pattern,
choose the desired partition from the drop-down list box. See the
“Partition
Configuration” section on page 52-1 for more information on how to use
partitions.
You can configure the number of partitions that display in this drop-down list
box by using the Max List Box Items enterprise parameter. If more partitions
exist than the Max List Box Items enterprise parameter specifies, the Find
button displays next to the drop-down list box. Click the Find button to display
the Find and List Partitions window. Find and choose a partition name by using
the
Finding a Partition procedure in the Cisco Unified Communications
Manager Administration Guide.
Note Configure transformation patterns in different non-null partitions
rather than dialing patterns such as route patterns and directory
numbers. For transformation pattern lookups, Cisco Unified
Communications Manager ignores the patterns in null partitions.
Note To set the maximum list box items, choose System > Enterprise
Parameters and choose CCMAdmin Parameters.
Note Make sure that the combination of pattern, route filter, and partition is
unique within the Cisco Unified Communications Manager cluster.
Description Enter a description of the transformation pattern.
Numbering Plan Choose a numbering plan.