Filter
Top Products
60-4
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 60 Translation Pattern Configuration
Translation Pattern Configuration Settings
Provide Outside Dial Tone Outside dial tone indicates that Cisco Unified Communications Manager
routes the calls off the local network. Check this check box for each
translation pattern that you consider to be off network.
Urgent Priority If the dial plan contains overlapping patterns, Cisco Unified
Communications Manager does not route the call until the interdigit
timer expires (even if it is possible to dial a sequence of digits to choose
a current match). Check this check box to interrupt interdigit timing
when Cisco Unified Communications Manager must route a call
immediately.
Tip By default, the Urgent Priority check box displays as
checked.Unless your dial plan contains overlapping patterns or
variable length patterns that contain
!, Cisco recommends that
you do not uncheck the check box.
Calling Party Transformations
Use Calling Party’s
External Phone Number
Mask
Check the check box if you want the full, external phone number to be
used for calling line identification (CLID) on outgoing calls.
Calling Party Transform
Mask
Enter a transformation mask value. Valid entries for the NANP include
the digits 0 through 9, and the wildcard characters asterisk (*) and
octothorpe (#); the international escape character +; and blank. If this
field is blank and the preceding field is not checked, no calling party
transformation takes place. Refer to the
“Adding a Route List” section on
page 43-2 for more detailed information.
Prefix Digits (Outgoing
Calls)
Enter prefix digits. Valid entries for the NANP include the digits 0
through 9, and the wildcard characters asterisk (*) and octothorpe (#); the
international escape character +.
Note The appended prefix digit does not affect which directory
numbers route to the assigned device.
Table 60-1 Translation Pattern Configuration Settings (continued)
Field Description